Friend |
Site |
Result |
Problem |
Text |
g.Maccaferri |
Medicina |
Success |
None |
None |
Michael Lindqvist |
Onsala |
Minor failures |
None |
1. We had a few "record pointer not incrementing" from the Mark5 software. FS reported no errors though. We have saved the Mark5 log. 2. FS clock: We got "setcl: formatter to FS time difference 0.5 s". Took some time before the operator saw that and used the command sy=run setcl offset &. |
K. Borkowski |
Torun |
Success |
None |
No known problems (save, of course, RFI, which are a sort of norm). |
Jonathan Quick |
Hartebeesthoek |
Minor failures |
HIGH |
Heavy rain expecially towards the end of experiment |
Tony Foley |
Westerbork |
Minor failures |
RFI |
Wb used in phased array mode. RFI started at low level but became very strong during the run. The array data will be difficult to calibrate. |
A. Polatidis |
Effelsberg |
Minor failures |
None |
Started with slightly warm receiver, Tsys was around 10K higher than normal in the first couple of hours. The receiver temperature stabilised after the first two hours. Lost scans 2147-2208 due to long drive to pointing source |