| Friend | Site | Result | Problem | Text |
|---|---|---|---|---|
| g.Maccaferri | Medicina | Success | None | None |
| Michael Lindqvist | Onsala | Minor failures | None | 1. We had a few "record pointer not incrementing" from the Mark5 software. FS reported no errors though. We have saved the Mark5 log. 2. FS clock: We got "setcl: formatter to FS time difference 0.5 s". Took some time before the operator saw that and used the command sy=run setcl offset &. |
| K. Borkowski | Torun | Success | None | No known problems (save, of course, RFI, which are a sort of norm). |
| Jonathan Quick | Hartebeesthoek | Minor failures | HIGH | Heavy rain expecially towards the end of experiment |
| Tony Foley | Westerbork | Minor failures | RFI | Wb used in phased array mode. RFI started at low level but became very strong during the run. The array data will be difficult to calibrate. |
| A. Polatidis | Effelsberg | Minor failures | None | Started with slightly warm receiver, Tsys was around 10K higher than normal in the first couple of hours. The receiver temperature stabilised after the first two hours. Lost scans 2147-2208 due to long drive to pointing source |